SDGs
Why Is Sustainable Design Important? What the 2025 Gap Shows

Why is sustainable design important? Because design decisions fix most of a product’s or building’s energy, material and waste footprint before anything is made, and the world is still heading for more warming than its own climate plans promise. UNEP’s Emissions Gap Report 2025, published on 4 November 2025, found that full implementation of current national climate plans, known as nationally determined contributions (NDCs), points to 2.3 to 2.5 degrees Celsius of warming this century.
The report arrived days before the COP30 climate conference opened in Belém, Brazil, on 10 November. For anyone who designs products, buildings or services, NDCs are the policy layer that sets the pace of energy, materials and transport rules for the next decade.
Key takeaways
- An NDC is a country’s climate pledge under the Paris Agreement, renewed every five years.
- UNEP’s Emissions Gap Report 2025 says full implementation of NDCs leads to 2.3 to 2.5 degrees of warming, and current policies lead to about 2.8 degrees.
- The UN climate secretariat’s synthesis report of 28 October 2025 covered 64 new NDCs, which represent about 30 percent of 2019 global emissions.
- The European Commission estimates that up to 80 percent of a product’s environmental impact is determined at the design stage.
Why is sustainable design important for the climate?
The European Commission’s circular economy strategy says that up to 80 percent of a product’s environmental impacts are determined at the design phase. The figure is a policy estimate rather than a precise measurement, but it explains why regulators now write rules for design instead of only for waste. Material choice, energy use, lifespan and repairability are fixed early and are expensive to change later.
The same logic applies to buildings and services. A building designed for low energy use keeps saving for decades, while a poorly insulated one locks in demand. This is the practical link to SDG 13, climate action.
What are NDCs and how do they work?
Under the Paris Agreement, every party submits an NDC that sets out what it will do to cut greenhouse gas emissions and, in many cases, how it will adapt. Countries must submit a new, more ambitious NDC every five years, and the 2025 round covers targets for 2035.
NDCs are not enforced like a trade treaty. Their force comes from transparency, peer pressure and national laws written to deliver them. That is why NDCs matter for design: they translate into building codes, vehicle standards, energy prices and product rules.
What did the 2025 reports say?
UNEP’s report, titled “Off Target”, found that new pledges have lowered expected warming only slightly. Projections that assume full implementation of NDCs are 2.3 to 2.5 degrees Celsius, compared with 2.6 to 2.8 degrees in the 2024 edition. Projections based on current policies are about 2.8 degrees, compared with 3.1 degrees previously. The multi-decade average temperature will exceed 1.5 degrees, at least temporarily.
The UN Climate Change secretariat published its own NDC synthesis report a week earlier, on 28 October 2025. It analysed 64 new NDCs, covering about 30 percent of global emissions in 2019, and found that they imply emissions 17 percent below 2019 levels by 2035. The report cautions that the sample is small, so no global conclusion can be drawn from it alone.
How is progress measured?
The headline indicator for climate action under the SDGs is national greenhouse gas emissions, reported through national inventories. For design work, the equivalents are a life-cycle assessment of a product, an energy-use figure per square metre for a building, or a carbon footprint per service delivered. Naming the number makes the benefit visible and testable.
What can designers do with this?
Design for tighter standards
Even with modest NDCs, the direction is toward lower-carbon energy, materials and transport. Specifying repairability, low embodied carbon and efficient energy use means designing for rules that will arrive anyway. The link to SDG 7, clean energy is direct.
Move adaptation into the brief
If warming overshoots 1.5 degrees, even temporarily, buildings and public spaces must cope with more heat, floods and storms. Shade, cooling, drainage and durable materials become core requirements.
What should a design brief say about emissions?
A brief that mentions sustainability without numbers is easy to forget. Designers can ask clients to add six short items so that the climate effect of a decision can be checked later.
- A baseline: the emissions or energy use of the product, building or service being replaced
- A boundary: whether the figure covers materials only, production, use, or the full life cycle
- A unit that allows comparison, such as per square metre per year, per user or per delivered service
- A source for the data, ideally a recognised database or a supplier declaration
- A target and a date, so progress can be reviewed
- An adaptation requirement, such as heat, flood or storm resilience for the expected lifetime
With those six items, a team can compare options honestly. It also protects the studio: if the client later asks why a material was chosen, the file shows the reasoning and the numbers at the time.
This habit matters more as national climate plans tighten. A design that meets today’s rules only narrowly may need costly changes within a few years, while one with headroom will not.
Frequently asked questions
What does NDC stand for?
NDC stands for nationally determined contribution. It is a country’s plan to cut emissions and adapt to climate change under the Paris Agreement, and it must be renewed and strengthened every five years.
What is the emissions gap?
The emissions gap is the difference between where emissions are heading under current promises and policies and where they need to be to meet the Paris temperature goals. UNEP publishes an assessment each year before the UN climate conference.
Is design really that influential?
Design is influential because it sets materials, energy use and lifespan early. The European Commission’s estimate that up to 80 percent of a product’s impact is decided at the design stage is a policy figure, but the direction is well supported: late changes cost more than early ones.


